Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

Eibach lowering kit

Thread Tools
 
Search this Thread
 
Old Feb 21, 2008 | 08:35 PM
  #1  
must87's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 13
Likes: 0
Default Eibach lowering kit

Has anyone installed this and do you have pictures? I have a '93 extra cab to pull the race car and a couple of inches down is all I need to go I think. Eibach says 2.5" front and 2.0" rear, seems like it might point the grill right into the ground in the front!

Thanks if you've done this.
Reply
Old Feb 21, 2008 | 10:49 PM
  #2  
dewman's Avatar
No Pain, No Pain!
 
Joined: Jul 2007
Posts: 4,825
Likes: 12
From: Baltimore, Maryland
Default

Why do you need to lower the truck to tow the race car? Is it because the trailer does not set level when hooked to the truck?

You can buy a hitch ball mount that has a drop to it, rather then lowering the truck, much less expensive too.
Reply
Old Feb 22, 2008 | 08:09 AM
  #3  
must87's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 13
Likes: 0
Default

I don't need to lower to tow, just for looks. I think DJM has a kit that lowers more than Eibach and I don't want to go too low. Also just wondered what a 2" drop looked like if anyone had done it.
Reply
Old Feb 22, 2008 | 08:27 AM
  #4  
dewman's Avatar
No Pain, No Pain!
 
Joined: Jul 2007
Posts: 4,825
Likes: 12
From: Baltimore, Maryland
Default

Originally Posted by must87
I don't need to lower to tow, just for looks. I think DJM has a kit that lowers more than Eibach and I don't want to go too low. Also just wondered what a 2" drop looked like if anyone had done it.
Okay, was just wondering, there are a couple of members here that have lowered their trucks. The will come along eventually and give you some recommendations.
Reply
Old Feb 22, 2008 | 10:22 AM
  #5  
tonkatruck66's Avatar
mmmm.....
 
Joined: Nov 2007
Posts: 1,740
Likes: 0
Default

DJM. offered a 3/5. thats what i had on my truck before it wrapped around a pole. i can get pictures if you would like.
Reply




All times are GMT -4. The time now is 12:20 PM.