door striker
Thread Starter
Senior Member
Joined: Nov 2013
Posts: 1,095
Likes: 56
From: greatest state in U.S. (Texas)
door striker
well here it goes, I was replacing the door striker on my girlfriends 1992 f350, yes she has a bigger truck than I do 
, and I stripped out the clip inside the cab that it bolts to I tried using thread lock and jb weld with no luck so the only other thing I know to do is retap it and try and find a bolt the same size with a different thread count unless anyone knows how to replace this clip, any help is very appreciated
, and I stripped out the clip inside the cab that it bolts to I tried using thread lock and jb weld with no luck so the only other thing I know to do is retap it and try and find a bolt the same size with a different thread count unless anyone knows how to replace this clip, any help is very appreciated
Drive like you stole it
Joined: Mar 2013
Posts: 884
Likes: 70
From: Where the snow/salt is
No actual experience with that but.. If you can pull interior panels apart and get to the back maybe you can just put a nut on? Or, if there is enough metal to do so you could step up to the next size thread, drill/tap it and install a new bolt. Or try to find a new clip from a junkyard
Thread Starter
Senior Member
Joined: Nov 2013
Posts: 1,095
Likes: 56
From: greatest state in U.S. (Texas)
well that's the problem I have no idea how to get to it I pulled the panel and there just no way and I guess im going to retap it but I was hoping someone knew a way to get to it lol