Codes...
Thread Starter
Member
Joined: Sep 2009
Posts: 99
Likes: 0
From: Sudbury, Ontario
Codes...
Ya, another one of these. Used the 50 dollar code reader. I have been getting approximately 9 MPG city, probably around 14 or 15 highway. I have also had a brake light/anti lock brake light on for about a month, and have had decreased MPG since then. The engine also has a miss some where, at idle the entire thing shakes. Have 33 with a 302.
KOEO
Pulled a 111, all good.
In the memory...
327 - EGR valve position circuit below minimum voltage
328 - EGR closed alve coltage lower than expected
334 - EGR Closed valve voltage high
So I guess my EGR valve has died?
KOER
CYL 8 - this showed up, is the cylinder dead?
225 - Knock sensory fault during dynamic response test
536 - Brake O/O cirucit not activated during KOER
632 - Overdrive transmission cancel switch/no action during self engine run test. (the switch works)
KOEO
Pulled a 111, all good.
In the memory...
327 - EGR valve position circuit below minimum voltage
328 - EGR closed alve coltage lower than expected
334 - EGR Closed valve voltage high
So I guess my EGR valve has died?
KOER
CYL 8 - this showed up, is the cylinder dead?
225 - Knock sensory fault during dynamic response test
536 - Brake O/O cirucit not activated during KOER
632 - Overdrive transmission cancel switch/no action during self engine run test. (the switch works)
Senior Member
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
Ya, another one of these. Used the 50 dollar code reader. I have been getting approximately 9 MPG city, probably around 14 or 15 highway. I have also had a brake light/anti lock brake light on for about a month, and have had decreased MPG since then. The engine also has a miss some where, at idle the entire thing shakes. Have 33 with a 302.
KOEO
Pulled a 111, all good.
In the memory...
327 - EGR valve position circuit below minimum voltage
328 - EGR closed alve coltage lower than expected
334 - EGR Closed valve voltage high
So I guess my EGR valve has died?
No, but your EVP sensor dosen't sound to good
KOER
CYL 8 - this showed up, is the cylinder dead? Denotes it from a 6 cylinder
225 - Knock sensory fault during dynamic response test Operator Error
536 - Brake O/O cirucit not activated during KOER Operator Error
632 - Overdrive transmission cancel switch/no action during self engine run test. (the switch works) Operaror Error
KOEO
Pulled a 111, all good.
In the memory...
327 - EGR valve position circuit below minimum voltage
328 - EGR closed alve coltage lower than expected
334 - EGR Closed valve voltage high
So I guess my EGR valve has died?
No, but your EVP sensor dosen't sound to good
KOER
CYL 8 - this showed up, is the cylinder dead? Denotes it from a 6 cylinder
225 - Knock sensory fault during dynamic response test Operator Error
536 - Brake O/O cirucit not activated during KOER Operator Error
632 - Overdrive transmission cancel switch/no action during self engine run test. (the switch works) Operaror Error
Not reading the Manual Operator Error