Codes
I get code meanings from here http://www.thorssell.net/hbook/2digit.html
52= Power Steering Pressure switch. You have to turn the wheel during the KOER test
25= Knock sensor not tested (ignore if not pinging). Visually check to make sure it's still wired in to the back of the engine.
22= MAP (vacuum) or BARO signal out of range. Check for vacuum leaks @ your MAP fitting. Mine had a crappy little rubber boot on it that was cracked.
11= System Check's OK.
52= Power Steering Pressure switch. You have to turn the wheel during the KOER test
25= Knock sensor not tested (ignore if not pinging). Visually check to make sure it's still wired in to the back of the engine.
22= MAP (vacuum) or BARO signal out of range. Check for vacuum leaks @ your MAP fitting. Mine had a crappy little rubber boot on it that was cracked.
11= System Check's OK.

