Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

clutch

Thread Tools
 
Search this Thread
 
Old Jan 30, 2012 | 12:00 PM
  #1  
fordtruck owner's Avatar
Thread Starter
Member
 
Joined: Jan 2012
Posts: 31
Likes: 0
Default clutch

i was driving my 95 f150 and the clutch pedal would only go half way down so i pressed harder and it popped now it goes to the floor and stays there can anyone tell we were to start looking on how to fix it
Reply
Old Jan 30, 2012 | 12:10 PM
  #2  
MoparFanForLife's Avatar
Senior Member
 
Joined: Dec 2011
Posts: 119
Likes: 0
From: Iowa
Default

check to make sure you didn't brake the cluch pedel under the dash, if that checks out i'd say the the cluch master cylinder
Reply
Old Jan 30, 2012 | 12:13 PM
  #3  
fastpakr's Avatar
Senior Member
 
Joined: Jan 2010
Posts: 466
Likes: 1
From: Roanoke, VA
Default

Sounds like the clutch master cylinder pushrod popped off the pedal assembly.
Reply
Old Jan 30, 2012 | 12:30 PM
  #4  
sylver91's Avatar
It's a Canadian thing eh!
 
Joined: Nov 2010
Posts: 6,539
Likes: 196
From: Ontario, living across a hay field
Default

So the pedal fell to the floor and wont come up, does it feel like nothing is holding it back or is there still some kind of resistance to it? Either the end of the push rod which is plastic broke off or the master crapped out. Check for fluid leaks underneath too.
Reply
Old Jan 30, 2012 | 05:47 PM
  #5  
fordtruck owner's Avatar
Thread Starter
Member
 
Joined: Jan 2012
Posts: 31
Likes: 0
Default

Originally Posted by sylver91
So the pedal fell to the floor and wont come up, does it feel like nothing is holding it back or is there still some kind of resistance to it? Either the end of the push rod which is plastic broke off or the master crapped out. Check for fluid leaks underneath too.
nothing is holding it back
Reply
Old Jan 30, 2012 | 06:00 PM
  #6  
sylver91's Avatar
It's a Canadian thing eh!
 
Joined: Nov 2010
Posts: 6,539
Likes: 196
From: Ontario, living across a hay field
Default

Originally Posted by fordtruck owner
nothing is holding it back
Then probably the push rod broke off, look underneath the dash where the pedals are and you should see it. You will probably have to replace the clutch master cyl completely because i don't think you can get that part on its own.
Reply
Old Jan 30, 2012 | 07:37 PM
  #7  
fordtruck owner's Avatar
Thread Starter
Member
 
Joined: Jan 2012
Posts: 31
Likes: 0
Default

thanks that will help me alot
Reply




All times are GMT -4. The time now is 05:26 PM.