Hey guys, my speedo and odometer aren't working (digital odo is blank, needle on speedo won't move) I checked the VSS and abs and everything there is ok. I tried to do the sweep test on the cluster(hold reset, key on, release reset) and the needles didn't sweep and won't reset. All my other gauges work. Do I have a bad cluster? Anyone have this problem before?

 

Did you check fuses

 

Yes forgot to put that in fuses are all ok.

 

Well, if the fuses are good (if your dome light and radio don't turn on also that would have been a blown fuse) the yeah it might be a bad cluster. The cluster is group of "pods" with the various gauges on them. The one with the speedo/odo might be bad or the plug to it. Probably have to take it off and check.

 

That's what I thought. Think it may be the PSOM. I'm going to grab a junkyard cluster and see... Only problem is the PO replaced the ECM and I'm not sure if it's right. I would imagine that could cause problems within the cluster as well.