I want to install new bezels on my 96... what's the easiest way to do it?

 

Very simple to do, Little tight working area tho..

There are 2 philips head screws on the top of the bezel,

There are two bolts that I think are 10mm that hold the turn signal to the frame..

The two bolts you are looking for are inside the cut outs of the frame so you will not see them, They are hidden.. It is the turn signals that are attached to the frame, once removed the whole assembly comes out as one..

You may want to remove the battery tray and the windshield fluid tray for more room.. It will make it much easier..

Ant....