Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

CB radio

Thread Tools
 
Search this Thread
 
Old 04-27-2012, 05:59 AM
  #11  
Junior Member
 
(ford)'s Avatar
 
Join Date: Apr 2012
Location: Nebraska
Posts: 12
Received 0 Likes on 0 Posts
Default

Hard to explain where mine is mounted. But in my 95, There is a cup holder right in front of the seat towards the middle, I mounted mine on the drivers side of the cup holder. Sounds worse then it looks, Looks good, and works great in that spot.
I have a midland, with 2 4' fire sticks. But I need to find a body plug where I can run the Coax. As of now, the Coax is ran through the door jam.
Old 04-27-2012, 07:14 AM
  #12  
Senior Member
 
jared424's Avatar
 
Join Date: Jun 2011
Location: Dallas, GA
Posts: 318
Likes: 0
Received 1 Like on 1 Post
Default

Mounted under dash to where the plastic attaches to the dash frame and all. Still have use of ash tray and power plug. Wiring is all ran under dash except for antenna wire that runs down the center of the cab an out the drain hole at the back of the cab on drivers side. Speaker mounter to plastic next to drivers head so I can actually here goin down the road lol
Attached Thumbnails CB radio-image-264573181.jpg   CB radio-image-3596447775.jpg  
Old 04-27-2012, 09:38 AM
  #13  
Junior Member
 
kd5rcx's Avatar
 
Join Date: Mar 2012
Location: Bono, Ar
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts

Default

You just missed another tread about cb locations
https://www.f150forum.com/f4/need-so...advice-147252/
Old 10-30-2016, 02:53 PM
  #14  
Junior Member
 
ssample78's Avatar
 
Join Date: Oct 2016
Posts: 5
Received 0 Likes on 0 Posts
Default

New to this site and new to CB Radios...I have a 1993 F150, where do I need to look to run the Coax from cab to the bed? Are there holes that are already accessible in the cab and bed or do I need to drill? (Sorry if this question has already been addressed somewhere else, I tried searching as best as I could)
Old 09-07-2017, 11:38 PM
  #15  
Junior Member
 
Joe Vinci's Avatar
 
Join Date: Sep 2017
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default thanks for the idea

Originally Posted by 95stepside
i mounted mine on the ash tray. ll i did was bend 2 pieces of scrap steel into "C"s around the faceplate and mount that came with the radio

​​​​​​​[img]webkit-fake-url://6d097e79-bcb7-4cb5-bddc-154e1364fcbd/imagejpeg[/img]works great!!! thanks again



Quick Reply: CB radio



All times are GMT -4. The time now is 10:33 PM.