I have a 1995 F150 4X4 with the aode tranny. The problem I have is the front seal area around bellhousing started leakin. Took out tranny replaced it with new pump assembly, because someone else had been in there before and butchered the seal and bushing thus the leak. I got it all back together even replaced torque converter. It was what I thought pretty straight forward replacement. I had tranny sitting up so no clutches would get out of place putting new pump on. Get it back in truck just to find out it will only engage in drive no reverse. While in reverse, got some fluid coming out of front end again while revving it up a little to see if it would move. This thing worked great before all of this except for the leak. Any help would be appreciated.