Any suggestions?
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 155
Likes: 1
From: Richland hills texas
Any suggestions?
I'm replacing my blown 4r70w with one out of a 2000 explorer next weekend.
Anyone have any suggestions? Tips hints anything? Me and a buddy are doing the swap Sunday.
Anyone have any suggestions? Tips hints anything? Me and a buddy are doing the swap Sunday.
Member
Joined: Mar 2009
Posts: 82
Likes: 0
Very first thinkgee before you move a bolt. WOT is the LEAK-DOWN on the top end? Pull the oil filter off, tear into it; pull the pleats apart; Watt say ye?
If she runs 6% or less, you lucked out. If she is 9-10% on the leak is rebuild either one. She is wearing out.
Besides, this is a more accurate way to check compression and who is leaking that needs refreshing.
If she runs 6% or less, you lucked out. If she is 9-10% on the leak is rebuild either one. She is wearing out.
Besides, this is a more accurate way to check compression and who is leaking that needs refreshing.
Hybrid Truck
Joined: Jan 2009
Posts: 373
Likes: 0
From: Mesa Arizona
Not real sure what year your sticking this into but make sure the impedance
of the 2000's shift solenoids are the same as your old trans.
I believe that there are 2 different solenoids just done know which came in which years.
of the 2000's shift solenoids are the same as your old trans.
I believe that there are 2 different solenoids just done know which came in which years.