Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

another"I gotta problem"

Thread Tools
 
Search this Thread
 
Old Apr 7, 2008 | 09:35 PM
  #1  
bobstrixx's Avatar
Thread Starter
Member
 
Joined: Sep 2007
Posts: 31
Likes: 0
Default another"I gotta problem"

I went to the gas station after work. It was running good. Put gas in it, get and wont start. It spitted and sputtered a little. I was able to chug it along back to work, after finally getting it started. i changed the fuel pump, and filter(which was clogged). Now no fuel will come out. Is there a pump trelay some where? Then now the B*&CH, wont get spark, I changed the coil. Any ideas? I never had any prblems all through winter i'd go out on very very cold night, and she'd fire right up.
Reply
Old Apr 7, 2008 | 09:45 PM
  #2  
ma94xlt's Avatar
Senior Member
 
Joined: Sep 2007
Posts: 481
Likes: 13
From: Columbus GA 31909
Default

What year?? Get the TFI module checked.. Adavnce Auto checks them...
Reply
Old Apr 7, 2008 | 09:48 PM
  #3  
bobstrixx's Avatar
Thread Starter
Member
 
Joined: Sep 2007
Posts: 31
Likes: 0
Default

It's a 87 4.9. What's the TFI?
Reply
Old Apr 7, 2008 | 10:14 PM
  #4  
bobstrixx's Avatar
Thread Starter
Member
 
Joined: Sep 2007
Posts: 31
Likes: 0
Default

After making this thread, then reading other threads. I went out and was going to check out the fuel pump relay. It took the 2 small screws off, then flipped relay over, and there it was. A wire had corroded, and fell off. I cut old end off then put a small male plug on it. plug relay back in. I went to start it it fired right up. Thanks ma94xlt, for your suggestion. I'm gonna go to junkyard, and get a good connector cause, I can see the other connections are corroded at these two plugs.
Reply




All times are GMT -4. The time now is 08:03 PM.