Ford F150 Forum - Community of Ford Truck Fans

Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

5 speed swap

Thread Tools
 
Search this Thread
 
Old Dec 1, 2011 | 05:41 PM
Share
  #1  
fircatfanatic's Avatar
fircatfanatic
Thread Starter
Junior Member
 
Joined: Mar 2011
Posts: 28
Likes: 0
Default 5 speed swap
i am in the process of swapping a m5od into my 92 f150 and i was wondering if someone could give me the demensions of the hole i need to cut in the floor for the shifter. thanks in advance.
Reply
0
Old Dec 1, 2011 | 07:10 PM
Share
  #2  
dirtcrew51m's Avatar
dirtcrew51m
Springer Spaniels Rule
 
Joined: Jun 2009
Posts: 3,445
Likes: 17
From: Milltown, NJ
Default
You dont need to. There is a removable plate on the tunnel to accommodate the stick shift. Just find one from a donor truck. Easier to do that. Or try LMC.
Reply
0
Old Dec 1, 2011 | 10:18 PM
Share
  #3  
90customf150's Avatar
90customf150
steveng
 
Joined: Jan 2011
Posts: 679
Likes: 1
From: Salisbury
Default
^x2
Reply
0
Old Dec 4, 2011 | 05:56 PM
Share
  #4  
fircatfanatic's Avatar
fircatfanatic
Thread Starter
Junior Member
 
Joined: Mar 2011
Posts: 28
Likes: 0
Default
did some of the older f150s not have a removable floor pan because there is no screws holding this onedown like on my 96 and it looks to be one piece with the rest of the floor?
Reply
0
Old Dec 4, 2011 | 08:21 PM
Share
  #5  
90customf150's Avatar
90customf150
steveng
 
Joined: Jan 2011
Posts: 679
Likes: 1
From: Salisbury
Default
Pic!
Reply
0
Old Jan 1, 2017 | 12:57 PM
Share
  #6  
rwoodie's Avatar
rwoodie
panic button
 
Joined: Dec 2016
Posts: 4
Likes: 0
From: Nc
Default
My 96 does not have the bolt in pan can i cut and put this in my 96 from the donor truck
Reply
0
Back to Subforum
1987 - 1996 F150
View Next Unread
Interesting Stalling Issue -- Can we figure it out before the snow comes?




Advanced Search

All times are GMT -4. The time now is 08:59 AM.