1997 f250hd prerunner build
11-01-2011, 10:10 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2011
Location: olathe ks
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
1997 f250hd prerunner build
A couple guys suggested i put a couple pics of my truck over here.
here they are.
1997 f250hd prerunner
-460 w/ comp cam extreme 4x4 cam, ported heads, headers, 3" exhaust ,EGR delete, smog pump delete, flowmaster series 50, ghetto K/N air intake
-2.5"/12" King Coilovers, Solo motorsports C&T on dana 50 TTB, Progressive leaf pack, Rancho RS9000 rear shocks (mistake, going to go with big bilsteins)
-I designed and fabricated the shock hoops, engine cross-member, radius arms, tranny cross-member, swing away tire carrier, bumpers, light bar, engine cage.
-put a bronco gas tank in
-5 General Grabber Red Letters
here they are.
1997 f250hd prerunner
-460 w/ comp cam extreme 4x4 cam, ported heads, headers, 3" exhaust ,EGR delete, smog pump delete, flowmaster series 50, ghetto K/N air intake
-2.5"/12" King Coilovers, Solo motorsports C&T on dana 50 TTB, Progressive leaf pack, Rancho RS9000 rear shocks (mistake, going to go with big bilsteins)
-I designed and fabricated the shock hoops, engine cross-member, radius arms, tranny cross-member, swing away tire carrier, bumpers, light bar, engine cage.
-put a bronco gas tank in
-5 General Grabber Red Letters
11-01-2011, 10:27 PM
#5
Originally Posted by 7700 in Alberta
Awesome!! So does it still have the ttb in the front? I noticed coilovers in front. What's locating the front axle now? I'm assuming the front leafs are gone.
Trending Topics
11-01-2011, 10:37 PM
#9
Junior Member
Thread Starter
Join Date: Oct 2011
Location: olathe ks
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
i am locating the ttb with radius arms, like a bronco or an f150, but much longer, and with currie johnny joints on the ends. yeah leafs are gone, did a coilover conversion.
Last edited by WSI; 11-01-2011 at 10:41 PM.
11-01-2011, 10:50 PM
#10
Originally Posted by WSI
i am locating the ttb with radius arms, like a bronco or an f150, but much longer, and with currie johnny joints on the ends. yeah leafs are gone, did a coilover conversion.
Good job on the rear tire carrier! I would like to build one but need to see one in person before I would attempt it!