1995 push button 4x4 won't disengage
#1
1995 push button 4x4 won't disengage
Hey all , Having a small problem with my push button 4x4 actuator. It'll engage into 4 wheel drive no problem , but every once in a while it doesn't want to disengage back to 2hi. I've tried neutral , backing up , you name it. The only way I get it back into 2hi again is to sit there and repeatedly push the button till it decides to work. When I try and it doesn't work , I can't hear the click from behind the glove box. Is there a part behind the glove box that needs replacement??
#2
American Pride!!
Join Date: Oct 2008
Location: Keystone Heights,FL
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
There is a 4x4 shift module thats on the passenger side under the glove box. It has a test button on it. The Haynes manual explains how to test it I beleive. Mine went out but thats because it got water logged after I sank my truck and I had to replace it after I was stuck in 4lo. I bought another one from a JY for 50 bucks and did a test before I bought it. Works great now.
#3
I just looked in my haynes manual and couldn't find anything in there other than a general description of how the electronic transfer case works. Is this shift module behind or under the glove box? Does the glove box have to come out?
#4
American Pride!!
Join Date: Oct 2008
Location: Keystone Heights,FL
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
No the glove box doesnt have to come out. Its behind the side panel in front of the passenger side door. It should be grey. There is a test procedure for it, I must have gotten it off of the Bronco forum. I will try and find it but if I cant google the bronco forum. You might have to be a member to search, and they arent very friendly to redundant questions.