92'FordF150

Hey guys, I haven't been on in a while but I need some help. My passenger side window is stuck down. Usually this will happen but it will go back up after a few hours, it hasn't for 2 days now. I just want to prop it up with a wood block but I've heard this has to be done a certain way or else I could loose a finger? I'm just looking to disconnect the motor. Also if I hold the switch down my battery gauge dips down so do I have bad grounds? Fuses are good but just looking for some advice. (I did do a search but didn't come across anything so if you could point me to a thread that would be great!)

-Tony

4wheeldevil

the gears in the motor might be stripped when you pull the motor crack it open and check.

superduty

Tap on the regulator with a screwdriver handle while holding down the switch before you pull the regulator. Might be able to get it up. It the volt Gauge moves when you push the button your Gettin power so your regulator is on it's way out. (if it's not already gone)

f150cam

the weirdest thing would happen with my 150s passenger window, it would randomly want to stay down, no matter what i did would make it go back up...until, i took the truck for a spin around the block, after about a mile she rolled right up and worked fine for another 4 months till it did the same thing, another drive and it rolled up...so i dont know what the problem is, never will lol.