Topic Sponsor

Blinker lever issue!?!?!?

Thread Tools
 
Search this Thread
 
Old 04-02-2015, 02:36 PM
  #1  
Senior Member
Thread Starter
 
96f150351w's Avatar
 
Join Date: Feb 2015
Posts: 290
Likes: 0
Received 1 Like on 1 Post
Default Blinker lever issue!?!?!?

I had too change my blinker lever in my 96 f150 because the right blinker wouldn't come on at all. I was trying to get the one electrical clip off and it just didn't want too come off. Finally when I got it off I found that part of it was melted. I've been smelling this smell alittle right the blinker stoped working. What could this be from? Short somewhere or what? Thanks.
Old 04-02-2015, 02:37 PM
  #2  
Senior Member
Thread Starter
 
96f150351w's Avatar
 
Join Date: Feb 2015
Posts: 290
Likes: 0
Received 1 Like on 1 Post
Default

Blinker lever issue!?!?!?-image-3895807085.jpg

That's the clip. Not sure if you can see it too well.
Old 04-03-2015, 10:05 AM
  #3  
1994 F150 XLT 5.8L 2wd
 
fltdriver's Avatar
 
Join Date: Mar 2014
Location: Iowa
Posts: 2,150
Received 247 Likes on 237 Posts
Default

From a short, yes. Where, hard to say. More than likely if the multifunction lever was bad it could have come from there. I would double check your fuses and make sure that you have the proper size fuse in every spot.
Old 04-03-2015, 10:57 AM
  #4  
Senior Member
Thread Starter
 
96f150351w's Avatar
 
Join Date: Feb 2015
Posts: 290
Likes: 0
Received 1 Like on 1 Post
Default

Me and my buddy were thinking it was because of the messed up lever. Drove around alittle yesterday and didn't smell nothing but then again I had all the windows open...I'm still going too check the fuses.



Quick Reply: Blinker lever issue!?!?!?



All times are GMT -4. The time now is 10:07 AM.