Interior wood grain delete: Vinyl wrap carbon fiber
#1
Interior wood grain delete: Vinyl wrap carbon fiber
I purchased 5'x2' roll of 3M Scotchprint 1080 Carbon Fiber Vinyl Flex Wrap Black from Metrorestyling. The product itself was great. If you do buy make sure you buy plenty of the primer as well. I ran out about halfway thru. I meant to take lot more pics but got caught up in the process.
It took quite awhile to take apart the center console and all the door panels off. All the pieces were relatively easy to wrap except for the radio piece. I had to end up cutting two pieces for the bottom section. You can hardly see the seams but it was just frustrating.
The door panels I just traced the plastic pieces then cut the vinyl leaving a 1/8" surround to leave room for error/wrap edges.
Entire process took about 10 hours (including take apart & re-assemble). It was my first experience with vinyl wrapping so I definitely took my time. Patience and heat gun or hair dryer are the key!
It took quite awhile to take apart the center console and all the door panels off. All the pieces were relatively easy to wrap except for the radio piece. I had to end up cutting two pieces for the bottom section. You can hardly see the seams but it was just frustrating.
The door panels I just traced the plastic pieces then cut the vinyl leaving a 1/8" surround to leave room for error/wrap edges.
Entire process took about 10 hours (including take apart & re-assemble). It was my first experience with vinyl wrapping so I definitely took my time. Patience and heat gun or hair dryer are the key!
Last edited by dobbern; 06-22-2014 at 08:51 PM.
The following users liked this post:
03screwon22's (06-03-2022)
#3
Can someone do a write up how to take interior pieces out of a 2009-up f150 with navigation?
The following users liked this post:
debryant71 (11-13-2014)
The following users liked this post:
dobbern (06-22-2014)
The following users liked this post:
dobbern (06-23-2014)
#10
The only wood grain I like in these trucks is the "black" wood in the 2008 limited and I just searched and they make "Blackwood" vinyl so I will definitely be doing the interior of my centurion with it.