Using Amsoil Pi in my fuel
#1
Senior Member
Thread Starter
Using Amsoil Pi in my fuel
I know many are not fans of "boutique" oils, ect...but I have had great luck with Amsoil Products. I used to work for Vehicular Testing Services and then Road Raced for Mazda. Time and time again, thier oils came up on top horsepower and temperature wise...but that is another subject.
With this All Aluminum TT DI engine, I am going to be running the Pi (Performance Improver) religiously. When these engine shut down and the fuel in the piezo injectors is left to "hot soak" and form deposits...I want them cleaned immediately. To keep costs down, I am going to use 50% of the suggested amount per gallon. I think the trick to keeping these engines running smooth and keeping decent mpg is too keep those injectors like new...
Since our 3.5 Ecoboosts don't come with an EGR System (due to Variable Valve Timing which can create the mix needed) the PCV would be the other player in the mix...
With this All Aluminum TT DI engine, I am going to be running the Pi (Performance Improver) religiously. When these engine shut down and the fuel in the piezo injectors is left to "hot soak" and form deposits...I want them cleaned immediately. To keep costs down, I am going to use 50% of the suggested amount per gallon. I think the trick to keeping these engines running smooth and keeping decent mpg is too keep those injectors like new...
Since our 3.5 Ecoboosts don't come with an EGR System (due to Variable Valve Timing which can create the mix needed) the PCV would be the other player in the mix...
Last edited by DieselDawg; 06-25-2011 at 03:03 PM.