Turbo problems
#21
I've actually got the same issue as the OP, or at least it sounds like it. It just started happening about a week ago. 2012 Eco with not quite 14000 miles. Mine is currently bone stock, but will probably put my tune back on it to see if it goes away.
I only notice the sound from 1000-2500 RPM, and is most noticeable when going up hill @ ~25% throttle. It sounds like a high frequency vibration or fluttering sound. It's very metallic sounding. Hard to describe. My brother heard it very well, so I know I'm not going insane.
I only notice the sound from 1000-2500 RPM, and is most noticeable when going up hill @ ~25% throttle. It sounds like a high frequency vibration or fluttering sound. It's very metallic sounding. Hard to describe. My brother heard it very well, so I know I'm not going insane.
#22
Member
Thread Starter
I had taken the tune off when I brought it to the dealership and just put it back on. The sound is more noticeable with the tune, so we'll see what happens once they look at the manifold.
#23
Member
Thread Starter
Got the truck back a little while ago after bringing it to the dealership to get the manifold looked at. They said there was a leak and changed the manifold and all associated gaskets/seals. Everything is good now! I kinda found it weird that Ford built the manifold so heavy duty and it managed to warp and cause a leak. Oh well, problem solved and fixed, no more fluttering sound.
#24
Keepin' the lights on!
Was it leaking at the head or the turbo flange? Have you reinstalled your tune yet?
#27
Opinionated Blowhard
This happened to my 2011 this past summer. The boost control wiring harness was not providing a 5 volt signal to the boost control module. It was 1.8 volts and the turbos were going crazy. 2 hours in the shop and the problem was solved.
#28
Member
#29
Paint Polishing Guru
a lot of these "sounds" people are hearing of high pitched metal and such sound a lot like my "sound" a few seconds after boost kicks in I get this "hamster in the wheel" noise that can't seem to be caught on film.
My local dealership says if it doesn't have a code we don't know what the issue might me…..where in the world did the mechanics of the world go!!! They won't even guess or diagnose a possible issue.
Cheers,
GREG
My local dealership says if it doesn't have a code we don't know what the issue might me…..where in the world did the mechanics of the world go!!! They won't even guess or diagnose a possible issue.
Cheers,
GREG