When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Have a pair of 04-08 Projector retrofit headlights. These are Black F150 headlamps that were ordered brand new and then retrofitted with A pair of the latest Moromioto mini D2S X lens 3.0 generation projectors, Gatling gun 2.0 square shrouds, Philips 85122 D2S bulbs 4300k (pure OEM white), 35w Morimoto XB35 (3FIVE) ballasts, and H13 plug in play kit with relays.
Headlights work perfectly. Insanely bright and crisp/sharp cutoff with "tuned" cutoffs so you get that razor sharp tinge of blue on the edge from a distance. Real Butyl rubber sealant was used to seal these up and several silica gel packets were thrown in for extra protection against moisture.
These were installed on my F150 for a matter of a few months before I retired the truck and have decided to sell them.
Only issue with them is the adjustment rod to control beam height touches the body/radiator surround when the lights are aimed up. Doesn't affect anything.
These have less than TEN HOURS on them, they are as close to new as can be except for being installed and having a little dust/dirt on the wiring.
Being that they have Ben used so little but have been installed for awhile, I'm going to let them go for $400 OBO Shipped to the lower 48 states. Reasonable, and I do mean REASONABLE offers will be considered. Don't insult me. I've done several retrofits so far and I do these right.
Please PM me. Need to sell these! PayPal vectorbin @ gmail.com
If you are local to the San Antonio area we can meet and possibly reduce the price....
Last edited by sigmanf150; 01-22-2016 at 02:15 AM.
Reason: Price change
And all they are, are projectors no halos or demon eyes?
No, no demon eyes or halos. I was going for a more OEM function without all the pizzazz. When I did these there was that rash of LED rings that would have dead diodes a few months after install and I said to my self I'm not doing all this work to have them possibly go to crap so quickly.
$425 shipped is a super nice price. Knowing how much parts cost, and the labor of doing it... This is a steal for anyone who picks them up.
Yea I spent nearly $500 on everything to put these together. I didn't do angel eyes, fancy LEDs, or other mods. Just clean and simple is what I was going for. As I mentioned the only real flaw is that when I mounted the projector buckets in the OEM reflector I tightened them up in a little too far downward position, so you have to compensate by pulling the adjustment screw way out and it contacts the radiator support. Not a big deal, just cut the bolt off so you can aim them higher.
I don't try to overcharge for my stuff. Fair value is all I ask. Be sure to check out my other stuff I have for sale.
01-18-2016, 12:46 AM
04-08 Custom HID Morimoto Projector headlamps!
