Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

Overhead console not working

Thread Tools
 
Search this Thread
 
Old 06-23-2009, 09:06 AM
  #1  
Junior Member
Thread Starter
 
jonesn's Avatar
 
Join Date: Dec 2008
Posts: 17
Likes: 0
Received 1 Like on 1 Post
Default Overhead console not working

2002 Lariat with the overhead console with temp/compass etc, the display does not light up, anyone know if there is a common issue with this before I disassemble to find out whats going on? The fuses are all good and all other components work.
The following users liked this post:
rickjonesy (05-25-2013)
Old 10-24-2009, 12:37 PM
  #2  
Junior Member
 
ZeroCoolSOB's Avatar
 
Join Date: Oct 2009
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

Try This : http://www.explorerforum.com/forums/...d.php?t=187953
Old 05-16-2013, 10:12 PM
  #3  
rickjonesy
 
rickjonesy's Avatar
 
Join Date: Oct 2010
Location: Columbia SC
Posts: 1
Received 0 Likes on 0 Posts
Default

I have a 2002 f150 with overhead console, the display did not work so I checked out the 501 resisters, they looked good to me. But I hit it with new solder anyway, I plugged it in and presto, it worked. Thanks to all
Old 05-16-2013, 10:31 PM
  #4  
Member
 
hamiltonjayson's Avatar
 
Join Date: May 2013
Posts: 80
Received 7 Likes on 4 Posts
Default

Mine was also out, and when I hit it with solder it lit right back up again. Although the temp reads -40 all the time. Any thoughts?
Old 05-16-2013, 11:00 PM
  #5  
Senior Member
iTrader: (2)
 
ibd2328's Avatar
 
Join Date: Mar 2012
Posts: 8,374
Received 524 Likes on 387 Posts

Default

Here ya go

https://www.f150forum.com/f74/how-fi...trucks-144566/
Old 05-16-2013, 11:13 PM
  #6  
Senior Member
 
fordtec's Avatar
 
Join Date: Nov 2011
Posts: 109
Likes: 0
Received 4 Likes on 3 Posts
Default

This worked for me! Works like a charm now! You can't have the soldering gun too hot tho.
Old 05-16-2013, 11:15 PM
  #7  
Member
 
hamiltonjayson's Avatar
 
Join Date: May 2013
Posts: 80
Received 7 Likes on 4 Posts
Default

Originally Posted by ibd2328
I did all that to get it to light back up, but the temp just stays at -40. The compass works though.
Old 05-16-2013, 11:19 PM
  #8  
Senior Member
iTrader: (2)
 
ibd2328's Avatar
 
Join Date: Mar 2012
Posts: 8,374
Received 524 Likes on 387 Posts

Default

Originally Posted by hamiltonjayson
I did all that to get it to light back up, but the temp just stays at -40. The compass works though.
Check the 555timer chip within the unit. That is what recieves the *temp* and uses thersholds vs VCC input to finally output an LED version of the temp.

Looks like a mini microchip with 8-16 legs on it
The following users liked this post:
hamiltonjayson (05-16-2013)
Old 05-16-2013, 11:29 PM
  #9  
Senior Member
iTrader: (2)
 
ibd2328's Avatar
 
Join Date: Mar 2012
Posts: 8,374
Received 524 Likes on 387 Posts

Default

First try cleaning the outside sensor off.. its under the hood , near the hood latch/radiator
The following users liked this post:
hamiltonjayson (05-16-2013)
Old 05-16-2013, 11:36 PM
  #10  
Member
 
hamiltonjayson's Avatar
 
Join Date: May 2013
Posts: 80
Received 7 Likes on 4 Posts
Default

Originally Posted by ibd2328
First try cleaning the outside sensor off.. its under the hood , near the hood latch/radiator
Thank you! I'll try both & let you know.
The following users liked this post:
rickjonesy (05-25-2013)


Quick Reply: Overhead console not working



All times are GMT -4. The time now is 12:01 AM.