Headlight switch question.
03-12-2015, 02:33 PM
#31
You could have a bad switch. I know on my 03 its timed once they come on. Try resetting the GEM. takes 15 minutes with the battery disconnected. It should work like normal except when in the auto setting.
03-12-2015, 02:35 PM
#32
Senior Member
Thread Starter
okay so here's what happened, with the surfboard with sensor installed, all lights were on, signals and low beams, with nothing covering them, the settings did not change them too off, there did seem to be a clicking like a relay behind the radio area. I disconnected the sensor and all lights worked as they should. Confussed
03-12-2015, 02:35 PM
#33
Senior Member
Thread Starter
03-12-2015, 02:40 PM
#34
Senior Member
Thread Starter
Apparently the sensor has an adjustment?
03-12-2015, 02:47 PM
#35
03-12-2015, 02:51 PM
#36
Senior Member
Thread Starter
that would be awesome lol, i just noticed it and I'm stairing at it with confusinon it reads "TURN ON ADJUST" 1/16 turn CCW is 15 minutes later, i get everything except when is 15 minutes later? Sorry for the questions I'm just not familiar with this thing haha
03-12-2015, 02:54 PM
#37
You turn it clock wise to make them come on sooner. Meaning more sensitive to light changes. C.C.W is counter clockwise. I would just turn the screw till light go off then adjust them as it gets clocser to dusk. Be mindful of daylight savings time so your not having to remember to do it when the time changes.
03-12-2015, 02:56 PM
#38
Senior Member
Thread Starter
You turn it clock wise to make them come on sooner. Meaning more sensitive to light changes. C.C.W is counter clockwise. I would just turn the screw till light go off then adjust them as it gets clocser to dusk. Be mindful of daylight savings time so your not having to remember to do it when the time changes.
03-12-2015, 03:09 PM
#39
Senior Member
Thread Starter
Okay.. The board just slides right out. There appears to be 5 connectors on the board and only 4 in the harness, not sure what thats about. Still trying to adjust it so far if the board is in the headlights are on even when the switch is set to offf..
Update: checked with light, power to the harness is good the switch is working, hot and then off, its either this sensor bad or something
Update: checked with light, power to the harness is good the switch is working, hot and then off, its either this sensor bad or something
Last edited by 02_Black_On_White; 03-12-2015 at 03:20 PM.
03-12-2015, 04:05 PM
#40
Senior Member
Thread Starter
How do i reset the GEM? Got the autolamp function working perfectly the problem is that in the off position the lights want to stay on. [MENTION=76842]Carcrazygts2[/MENTION]