Want to clear 295/60r20 on stock wheels
#11
Mark
iTrader: (1)
I was refereeing to what you said here.... I have an FX4, I have a taller rear block then a regular 4x4?
#12
TOTM 8/2019
Thread Starter
Ok, understand.
Anyone know the size of the stock rear block? If I know that then I can figure this out.
Anyone know the size of the stock rear block? If I know that then I can figure this out.
#13
Mark
iTrader: (1)
#14
TOTM 8/2019
Thread Starter
#15
Mark
iTrader: (1)
Your installing a front level with 295/60 LT tires and a taller rear block...do you think your ride is going to be better ??
I believe the stock block is 1 5/8" tall.
#17
TOTM 8/2019
Thread Starter
Thanks for the info. If this is accurate then a 3" block would be perfect for me(2" increase in front, 1 3/8" increase in back), would maintain a slight rake.
#18
Senior Member
Ride won't suck rear will ride the same. Very little difference with front spacers. Most ride difference will depend on what kind of tires you choose.
#19
If you haven't already done it....
After research, I like the 295/60r20 on the factory 20" wheels, while maintaining the factory rake. Would a 1.5" level work or do I need 2"? What size rear block do I need?
Nitto trails M/T 295/60/20 stock rims 2inch leveling kit with a spacer up front, back is stock, no trimming, although installer took 5 mins with a utility knife and trimmed spaces in the front plastic piece where it "might rub" while off roadibg
Nitto trails M/T 295/60/20 stock rims 2inch leveling kit with a spacer up front, back is stock, no trimming, although installer took 5 mins with a utility knife and trimmed spaces in the front plastic piece where it "might rub" while off roadibg