View Poll Results: How to modify and install right side FX2 badge on tailgate
Voters: 17. You may not vote on this poll
Help me brainstorm on this mod idea
#1
Help me brainstorm on this mod idea
Okay, well as some of you know, I just installed a set of 11-13 red and black FX2 fender badges. I decided to get an extra right side badge like the one below to replace the F150 badge on the drivers side of the tailgate. I have several options I have thought of.
PLEASE VOTE ON THE POLL!
1) Install it as is, leaving all the FX2 section
2) Cut off the FX2 section, but leave a small "tab" fill with a bondo material, sand and paint black to match.
3) Cut off all the FX2 "tab", leaving just the F150 portion and fill the "0" on the edge with bondo and paint black to match.
Any other suggestions are welcome. I did not go with the standard red/black tailgate F150 badge due to the contours on the backside.
PLEASE VOTE ON THE POLL!
1) Install it as is, leaving all the FX2 section
2) Cut off the FX2 section, but leave a small "tab" fill with a bondo material, sand and paint black to match.
3) Cut off all the FX2 "tab", leaving just the F150 portion and fill the "0" on the edge with bondo and paint black to match.
Any other suggestions are welcome. I did not go with the standard red/black tailgate F150 badge due to the contours on the backside.
Last edited by Summers22; 02-14-2015 at 09:04 AM.
#2
Senior Member
Okay, well as some of you know, I just installed a set of 11-13 red and black FX2 fender badges. I decided to get an extra right side badge like the one below to replace the F150 badge on the drivers side of the tailgate. I have several options I have thought of. 1) Install it as is, leaving all the FX2 section 2) Cut off the FX2 section, but leave a small "tab" fill with a bondo material, sand and paint black to match. 3) Cut off all the FX2 "tab", leaving just the F150 portion and fill the "0" on the edge with bondo and paint black to match. Any other suggestions are welcome. I did not go with the standard red/black tailgate F150 badge due to the contours on the backside.
#4
The only downfall to cutting the FX2 "tab" off is the whole F150 portion would need to be painted black, which I really dont want to do. Most likely, and because I think it will be different and unique, it will be mounted as it. Never seen a 04-08 FX2 with it on the tailgate.
#5
Senior Member
I personally prefer no badges at all, that's why I removed all of mine but if you like them then I would get rid of the tab all together.