Hadley air horn tank mount - Where?
09-28-2009, 12:22 PM
#1
Member
Thread Starter
Join Date: Aug 2009
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Hadley air horn tank mount - Where?
2006 Fx4.......
I already have the 7 inch air tank mounted behind my lower passsenger side front bumper, but that tank rusted through and developed a pin hole leak. I just ordered and received the 14 inch tank from Hadley for more air capacity to replace it.
My question is, where can I mount this bigger tank? I would like to locate it in the same area as not to have to re-run all the air lines. Does anyone know of a good way to mount this bigger air tank? Anyone have any pics?
Thanks in advance!
I already have the 7 inch air tank mounted behind my lower passsenger side front bumper, but that tank rusted through and developed a pin hole leak. I just ordered and received the 14 inch tank from Hadley for more air capacity to replace it.
My question is, where can I mount this bigger tank? I would like to locate it in the same area as not to have to re-run all the air lines. Does anyone know of a good way to mount this bigger air tank? Anyone have any pics?
Thanks in advance!
09-28-2009, 12:25 PM
#2
Junior Member
Join Date: Sep 2009
Location: Glasgow.KY
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
if i was you i would mount it somwhere under the hood if it would fit but in between the grill and the radiator but i dont kno if it will fit there ive never realy fooled withthem but a few friends have
09-28-2009, 10:40 PM
#3
Member
Join Date: Jul 2009
Location: Ohio
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
you know you could always save some money and make a tank out of pvc. I made one about 40" long and mounted it to my frame. It doesnt rust out and holds the air nicely. You can make it any size you want!
09-29-2009, 10:22 AM
#4
Member
Thread Starter
Join Date: Aug 2009
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
What is the PSI in your tank? What is the max pressure a PVC tank can hold?
