Fuse box ???
#1
Member
Thread Starter
Join Date: Mar 2009
Location: WARRENVILLE , S.C.
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Fuse box ???
I have an 07 s/c 4x4 xlt and i have been trying to figure out why my powerpoint on the dash does not work i checked all the fuses and the connection on the back of the plug itself and all seems good by doing some research i have found that fuse # 39 should be for instruments and the front powerpoint but on my fuse box # 39 is blank with no fuse connection according to my panel cover it calls for a 20a fuse so i bought some fuses and pushed a 20a in and there is nothing there to hold the fuse so i climbed into the floorboard with a light and sure enough there is nothing behind there to even hold a fuse so im lost please any suggestions would be helpful i know that this is something minor but its just irritating to me when things dont work like they should
#2
Senior Member
39 is on my electrical diagram, too.
Have you pulled the switch to make sure it is hooked up? Wires should be brown/pink (power from the fuse box) and black (ground).
Have you pulled the switch to make sure it is hooked up? Wires should be brown/pink (power from the fuse box) and black (ground).
#3
Member
Thread Starter
Join Date: Mar 2009
Location: WARRENVILLE , S.C.
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
If your refering to the powerpoint outlet the answer is yes i checked it to make sure it was plugged in and it is i just dont have any connections to the #39 fuse its wierd to me that the truck would have something that never worked but that looks to be the case