Led lisence Plate problems
#1
Senior Member
Thread Starter
Led lisence Plate problems
So the bulbs fit into the plugs, the plugs fit into the housing. But I can't turn the plug to lock it into the housing, I take the bulb out and the plug locks in place no problem. I'm thinkin the bulbs are too big or too long, any ideas?
There's the bulbs and plugs that goes into the housing
There's the bulbs and plugs that goes into the housing
#2
Senior Member
you need this type http://www.superbrightleds.com/cgi-b...ini-wedge.html. i ran into the same issue with mine and i bought this type and they fit just like oem
#3
Senior Member
Thread Starter
Originally Posted by flamehead16
you need this type http://www.superbrightleds.com/cgi-b...ini-wedge.html. i ran into the same issue with mine and i bought this type and they fit just like oem
#5
Senior Member
Thread Starter
Originally Posted by lbajo1
They are too long. And go with a high lummen (90+)white LED so it doesnt look blue when its in the lense housing.
#6
Senior Member
i can take a pic afterwork tonight when its dark. think mine are 5k lights and they work pretty good. also i think blue will get you a ticket.
#7
Mark
iTrader: (1)
I'm pretty sure you are required by law and DOT to have white lights for your plates...that's why the blue don't fit...
Trending Topics
#9
Mark
iTrader: (1)
Better check... DOT is a Fed mandate, your plate needs to be seen from a certian distance.
Last edited by techrep; 05-31-2012 at 10:34 AM.