4x4 dash indicator light
#32
Moderator
If you read this you will find that for our trucks the default position for 4x4 is engaged. When your engine stops the vacuum stops and the hubs engage. If your IWE solenoid fails completely you will be in 4x4 all the time or grinding trying to engage. It will probably cause many more problems later if you don't replace it.
The following users liked this post:
044x4F150 (05-24-2016)
#34
Moderator
That one should work just fine. No need to remove the battery or battery box. It is a little tight in there if you leave the battery in but I have big hands and managed to get it.
#36
HI 1st time here my 4x4 HI light stays on in 2wd and won't engage in HI or LOW , checked all fuses they are good ,changed the 2 relays under the hood no difference. Thinking maybe transfer case motor.
#38
Just took the transfer case motor off today. Tried another one I had still nothing,shifted the transfer case manually from 2 Hi into 4Low light went off. Put it back to 2 Hi reinstalled the transfer case motor. Tried shifting into 4 Hi and Low and it worked.
#39
#40
Moderator