4x4 dash indicator light
#1
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Montreal Qc
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
4x4 dash indicator light
The indicator light on the dash of my 2005 has suddenly stopped working when i put it in 4 wheel high. Thought it was just a burnt bulb but it lights up when I go to start up. It engages in 4 wheel drive with no problem and the light comes on for 4 low........just wondering if it's an indication of a problem or just another quirk like the squealing during really cold weather
Thanks in advance
Doug
Montreal Qc
Thanks in advance
Doug
Montreal Qc
#2
The indicator light on the dash of my 2005 has suddenly stopped working when i put it in 4 wheel high. Thought it was just a burnt bulb but it lights up when I go to start up. It engages in 4 wheel drive with no problem and the light comes on for 4 low........just wondering if it's an indication of a problem or just another quirk like the squealing during really cold weather
Thanks in advance
Doug
Montreal Qc
Thanks in advance
Doug
Montreal Qc
#3
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Montreal Qc
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Oh yeah...wasn't too bad mostly light and fluffy stuff but warmed up the next day to make it all wet and heavy. Don't mind it now that I have 4 wheel drive, most of the time I don't even shovel the driveway!
#7
When you start the truck, all the lights should go on as a test. Check the 4X4 light. I had the same problem and it turned out to be the 4X4 solonoid. It would shift into 4low but not 4high.
Trending Topics
#8
Check the IWE vacuum solenoid under the hood on the firewall passenger side. If you can hear the 4x4 hi engage, its usually this. They get moisture in them and there's a new design out with a shield over the solenoid. Literally takes 10 minutes to change.
The following 2 users liked this post by garo1:
BadFish523 (05-24-2016),
f150super (01-28-2014)