2004 4WD F150 Wheel bearing mystery
#1
2004 4WD F150 Wheel bearing mystery
I have an 04 4wd f150. I was doing a front brake job on it when I noticed a lot of play in the passenger front tire. Driver side was fine. After looking into it, it is in the bearing and the ball joints are fine. I go out and buy a bearing assembly to replace it. Install it, and still the same amount of play and it is 100% in the bearing. The axle end that rides the bearings are smooth and even and didn't appear to be worn. Has anyone ever seem something like this before?
Thanks
Thanks
#4
Did you replace the whole wheel hub?
#6
Can you post good pictures of where the problem is?
#7
Senior Member
2004 4WD F150 Wheel bearing mystery
The hubs can only have wheel play for two reasons: the hub is bad, or it's not mounted correctly.
I would take it off and check the o-ring and make sure the IWE actuator isn't damaged, causing the hub to not sit flush with the knuckle. If you bought a new hub, then maybe try to get it swapped out.
Of everything checks out ok, then it's either a bad hub, or not the hub at all.
I would take it off and check the o-ring and make sure the IWE actuator isn't damaged, causing the hub to not sit flush with the knuckle. If you bought a new hub, then maybe try to get it swapped out.
Of everything checks out ok, then it's either a bad hub, or not the hub at all.
Trending Topics
#8
Make sure you spend the extra money and buy a name brand hub assembly. I bought a lesser name from a well known chain parts store, and just a little over a year, I just spent over $2,500 for repairs from a wheel bearing blowout on the interstate. I took it to my local Ford dealership for repairs with the passenger wheel barely hanging on
, luckily I was at their exit.
, luckily I was at their exit.