jfernandez_9

Guys need some help, I'm looking to get some towing mirrors on my truck. Does anybody know if there is a way to adapt the super duty mirrors? I really like the look of the blinker in the front side instead the back side like the normal towing mirrors for the F150.
Thanks folks

Martian

Yes?

discodave

I recently picked up a pair of the power fold 1A Auto mirrors that look exactly like the F250 Tow Mirrors.


https://www.1aauto.com/2007-14-ford-...=869962&y=2014

RaptoRx7

https://www.f150forum.com/f38/powerf...irrors-239274/

discodave

Here's a crapping shot of mine

ericalbert

im trying to add tow mirrirs to my truck too. i have a '13 stx that has power adjust mirrors but no heat, no turn signals, and no puddle lights. i would like to get tow mirrors that have power adjust, heat, turn signals, puddle lights, manual telescope, and manual fold. i know that i would have to change out the piece in the dash to add the heated mirror button, but im wondering if everything else is plug and play? thanks

EcoBoostJake

It was plug and play when I did mine on my 2011 and then again for my 2014. The stock mirrors on both had power adjust, heat and signals. When I added my towing mirrors w/ puddle lights, they lit right up and I still had power adjust, heat and signals.

glazer1972

I just added towing mirrors and my puddle lamps lit right up.

Al_Maryland

Installed my tow mirrors with no problems. I had the power fold feature, so I had to run the wires for the switch. Other than that, it was plug and play for all the other features. It came with the correct corresponding connector for my truck. No soldering or splicing.

ericalbert

so im gathering that the plugs must all be the same regardless of the features that the truck came equipped with. i have been doing a little reading about these mirrors and i havnt heard of anyone saying that they had a different plug that wouldnt plug into the new tow mirror.