Retro Fits w a lil bling
#91
So just a little update on these lights:
* Unfortunately the manufacturer won't be willing to make these without the strip unless I pay for the molding process (not gonna happen)
* I asked him about the projector setup on these, and these lights use the Koito Q5 projectors, which are HID projectors and supposedly (according to somebody I'm talking to that retrofits) pretty damn good ones. I've seen a few comparisons stating that these are better than Morimoto d2s. Looks like they manufacture projectors for Audi, which explains the excellent HID output on these.
So all in all, with the higher than average build quality on the headlight housing and the quality projector setup, I'd say these lights are a damn good buy.
* Unfortunately the manufacturer won't be willing to make these without the strip unless I pay for the molding process (not gonna happen)
* I asked him about the projector setup on these, and these lights use the Koito Q5 projectors, which are HID projectors and supposedly (according to somebody I'm talking to that retrofits) pretty damn good ones. I've seen a few comparisons stating that these are better than Morimoto d2s. Looks like they manufacture projectors for Audi, which explains the excellent HID output on these.
So all in all, with the higher than average build quality on the headlight housing and the quality projector setup, I'd say these lights are a damn good buy.
The following users liked this post:
BlessedHellride (09-30-2016)
#92
Senior Member
iTrader: (1)
I'm actually thinking of these. Should be pretty easy to retrofit if I went that route
http://m.ebay.com/itm/291704269228?_mwBanner=1
http://m.ebay.com/itm/291704269228?_mwBanner=1
Would like to think so but can someone confirm?
Not too fond of the chrome projector shrouds so may paint.
Last edited by zimmer0; 09-30-2016 at 11:01 AM.
#93
https://m.alibaba.com/product/60013742570/NEW-DLand-MINI-HID-BI-XENON.html
Last edited by cmbezln; 10-02-2016 at 11:18 AM.
#94
Senior Member
iTrader: (1)
Yes they same manufacturer and they use this projector:
https://m.alibaba.com/product/600137...-BI-XENON.html
https://m.alibaba.com/product/600137...-BI-XENON.html
Anyone have experience with changing shrouds or diassembling and painting? Is it more of a snap on and off type fastener or are they glued/molded?
Also, how were you able to confirm that these are Koito projectors or are they Koito knockoffs?
#95
All these are screwed and glued. If I were going to take it apart and re-retrofit, I wouldn't buy those knockoffs that are already retrofitted, id just use my OEMs. Only reason id buy those (the ones linked earlier in the thread) is if I didn't want to bother with taking them apart.
#96
Senior Member
iTrader: (1)
I'm talking to the manufacturer via email right now
All these are screwed and glued. If I were going to take it apart and re-retrofit, I wouldn't buy those knockoffs that are already retrofitted, id just use my OEMs. Only reason id buy those (the ones linked earlier in the thread) is if I didn't want to bother with taking them apart.
All these are screwed and glued. If I were going to take it apart and re-retrofit, I wouldn't buy those knockoffs that are already retrofitted, id just use my OEMs. Only reason id buy those (the ones linked earlier in the thread) is if I didn't want to bother with taking them apart.
Appreciate the mfg follow ups
#97
Just make sure you seal em up good
#98
Senior Member
So..... after reading this....
Summary...
Is this finally a real , decent alternative for us wanting better headlights without having to spend crazy money on OEM HID's or a complicated/expensive retrofit?
Summary...
Is this finally a real , decent alternative for us wanting better headlights without having to spend crazy money on OEM HID's or a complicated/expensive retrofit?
#99
Yes they same manufacturer and they use this projector:
https://m.alibaba.com/product/600137...-BI-XENON.html
https://m.alibaba.com/product/600137...-BI-XENON.html
I stand corrected, scrolled further down and bingo..Spec-D
One thing I like about these over the non-LED's, aside from the Led strip and not having a similar chrome projector cover, is the transition from turn signal to the headlamp, it doesn't have that step up (or step down) similar to the oem's. Never understood why they didn't just make the signal window a tad smaller and run it across the bottom of the headlamp in a smooth line.
Last edited by BlessedHellride; 09-30-2016 at 02:16 PM.
#100
As long as you can handle the LED strip, then yes...these are almost identical and have a good quality HID projector. Get the headlights, get a quality HID H7 bulb and ballast, take apart and cover and/or paint over the LED strip and you have a headlight that's pretty damn close to OEM HIDs for 1/5th of the price or whatever they cost.