jmartinez136

Ok. Why cant you run the speaker wire through the rubber door boot? And why did they put a plug in for the wires to the door. Does this mean I have to drill holes and install a second rubber boot to install speaker wire? Any suggestions?

Wyo11Scab

iTrader: (1)

If you have a boot you can run wires. If you have a molex connector you need to drill thru the plastic molex connector. Some had boots and some had molex.

GATORB8

Here's a walkthrough on going through molex's. http://www.the12volt.com/installbay/...TID~78731~PN~1

I decided to reuse the factory wiring and put my crossovers in the doors when I discovered mine. It's hit or miss whether they're in a truck depending on which plant it was built in.

Pauli18c

I drilled a hole in my molex connectors and ran new wires.

https://www.f150forum.com/f30/how-do...-front-208899/

jmartinez136

Those pictures are not the same as what I have the plug in does not have the rubber boot over it omly on the door side. I think im forced to drill 2 new holes with grommets

Pauli18c

That's odd. I have an 11 as well and that's what mine look like.

Curious to see a picture of yours

SpeedViktm

IIRC*, it depends on where your truck was made. KC just has the rubber boot, Detroit has the molex.


(* = as always, I could be completely full of crap)

Pauli18c

That's why I'm confused, if he has the rubber boot he's good to go!

If I'm interpreting him right, he has a different style Molex??? I didn't know there was another one.

Wyo11Scab

iTrader: (1)

Some people are just hard to figure out. Like the guy who wanted to tap into his AUX but it was really his USB. I big difference when you are trying to help.....