SixShooter14

Thanks. I was looking at them online just because it's easier to browse that way. I found one that's 36"Lx14Hx7"D with the sub centered it listed something like 1.3ft. But it was about $50 so having a local shop make one might be better and can make it fit.

Toddman38

iTrader: (5)

Correct, the GMA5602, has Auto Sensing On, Hi Level Inputs! No remote turn on wire, needed. If you use Hi Level Input.

ginnjuice

The Rockford R2/R3 shallow 12" boxes will fit behind the rear seat, after cutting padding, but the seat bottom only folds up to about 75%. I would also recommended bending the exposed the bracket on the seatback to avoid beating up the box.

http://www.crutchfield.com/shopsearc...12%22_box.html, for reference. I believe the R3 has slightly larger dimensions.

SixShooter14

Thanks a lot guys. I'll surely have more questions once I get started.

Hopefully I can pull everything out of my old truck this weekend. Then maybe try installation over the holiday weekend.

SixShooter14

So, just by looking at things I'm a little worried about my current box fitting behind the seat. It's approx. 9" deep at the bottom. So I was browsing boxes and saw this Pioneer TS-SWX3002 Loaded Box. I'd still power it with my Pioneer GM-A5602 amp using the speaker-level inputs


Would y'all mind giving me your thoughts?

Here's a link:
http://www.pioneerelectronics.com/PU...unt/TS-SWX3002

Thanks a lot

pebkac

I have a single JL 13TW5v2-4 under the 40 split of my 2016 SCREW that hits clean and hard. Custom box

Toddman38

iTrader: (5)

I need the floor space, thats why I chose behind the seat!


Post pics...

pebkac

tuclai

Hi, are you able to fold the bottom seat cushion up? I noticed when you fold that bottom seat up it actually moves the back rest back even further on my 2017 Super Duty, which I believe has the same cab as yours.

Toddman38

iTrader: (5)

I cant comment for Sport Mode, buton mine with the 10" sub and box. I can lift the seat up fully.

Yes the f150 and SD, have the exact same seats and cabs.