Keypad code on door
#51
Has anyone figured out if the code is hiding anywhere on 2015+ models? I have a 2015 XLT SCREW that only came with one key and the darn card is no where to be found.
#52
Senior Member
That's not correct. Anyone can download manuals without registering. The manuals are not trim level specific, so take the most current manual for your model year.
Registering does get you the added benefit of more information about your truck including recalls, Sync updates, etc. but if you just want the manuals anyone can get them.
Registering does get you the added benefit of more information about your truck including recalls, Sync updates, etc. but if you just want the manuals anyone can get them.
Thanks for the heads up on that.
#53
Senior Member
it's on a box by the interior fuse panel on the passenger side of your truck
#54
With the 2 key procedure...where am I looking for the code to show up ? I've put in both keys, turned ignition on (not started) and I don't see any random numbers appear anywhere...??
#55
Senior Member
The procedure is in your owner's manual:
Displaying the Factory Set Code
Note: You will need to have two programmed passive anti-theft keys for this procedure.
To display the factory set code in the information display:
1. Insert a key into the ignition and turn the ignition on for a few seconds.
2. Turn the ignition off and remove the key.
3. Insert the second key into the ignition and turn the ignition on. The factory set code will display for a few seconds.
Note: The code may not display until after any other warning messages first display
The following users liked this post:
msirach (02-01-2017)
#58
I used the 2 key method tonight on my 2013 Lariat. It took about 1 minute and the code was revealed. I bought it used 2 weeks ago and it had all the books including the window sticker, but the card was missing. Thanks for this information.