stanand23

I was wondering where guys were running their wire for the Livewire and how are you guys mounting the tuner?

MGD

http://www.stage3motorsports.com/gal...atalogid=20644

MGD

PS - it's the OBDII cable.

stanand23

The link didn't work

bigtome

I ran mine down the side near driver's door. there is a removable panel that you can route the wired down to the diagnostic port.

mounted the tuner in the lower left hand portion of windshield with suction cup mounting

stanand23

Thank you!

Timc74

I put mine in the overhead console in the door for holding sunglasses. That way I can close it and the tuner is out of sight. I removed the plastic A pillar cover and tucked wire behind it and under the roof liner along the top of windshield. Can't see any wire at all.

stanand23

That is a great idea

DraKhen99

Be careful about that ... isn't there an airbag in the A pillars on our trucks? Years ago a professional installer friend of mine was helping me, and we had to remove the A pillar trim on my 2008 Civic, and lo-and-behold, there was an airbag back there.

We ended up routing the wire behind the airbag to be safe.

-John