Hellwig anti sway bars....
#532
Junior Member
Just installed today on my 16 screw. Installed using the tightest setting. Definitely much better handling around corners. Box came without any tears or holes from CA to FL and included all the right parts. Nice powder coating on the bar itself, but wish they had powder coated the other parts as well.
#534
Flaccid Member
#535
The FORScan Guy
I'm not sure what the cutoff is for longer endinks, just reporting my experience. I'm replacing those 2.25" blocks with 3" next week.
#536
so i installed this sway bar last week. does any one else think that it is unnecessarily low? i mean those thick metal things with the "v" cut into them could be alot shorter. im thinking about cutting them down. like keep the same "v" but make them half as thick so the bar sits higher. i dont see it causing any issues as the bar itslef provides plenty clearance around the diff cover and whatnot
#537
Originally Posted by mynameisRob
so i installed this sway bar last week. does any one else think that it is unnecessarily low? i mean those thick metal things with the "v" cut into them could be alot shorter. im thinking about cutting them down. like keep the same "v" but make them half as thick so the bar sits higher. i dont see it causing any issues as the bar itslef provides plenty clearance around the diff cover and whatnot
#538
When I got my 4" lift with 2.25" rear blocks, I was told I needed longer endlinks so I had these installed: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I'm not sure what the cutoff is for longer endinks, just reporting my experience. I'm replacing those 2.25" blocks with 3" next week.
I'm not sure what the cutoff is for longer endinks, just reporting my experience. I'm replacing those 2.25" blocks with 3" next week.
#539
Senior Member
#540
Originally Posted by brnr17
I emailed Hellwig, we will see what they say. I only have a total of 3/4" more lift then stock, so hopefully they will work without new links. Will report back when i hear from them.