I like that a lot. Very good choice!

 

Thank you. I love the simple old school design of the wheel.

 

35x12.50 r17 on stock ford rims trimmed some front valance no rubbing the inside but was super close to swaybar and suspension on the front os went with 11/2 spacers all around. 4inch lift
Before 1 1/2 spacers

 

315/75/16. 3 inch leveling kit and tbars cranked. rubs when locked but thats it.

 

Looks good man

 

315/70r17 on 17x8 4.5" bs with bumper trim and a little fender flare trim in the rear. No tbar crank or other suspension work. Only rubbing at full lock. Plus, these duratracs are damn silent until 70+ just a pain to balance

 

Very Nice!

 

Goodyear Duratrac 315/70r17 on stock rims/powder coated black
T-bar crank with torsion keys
3" body lift

 

Looos good man, imo that bullbar is extremely out of place, kind of looks like the crimson chin

 

Thanks!.. I Yeah I totally agree...With th 3" BL I need to fab the bull bar brackets to raise up the additional height. Probably complete that this Fall/Winter.

Also, next project is new exhaust from manifolds all the way back. Stock exhaust pipe sitting too low and needs replacing anyways.