4x91

Found a new wheeling spot




Near my house

4x91

(Removed)

4x91

FINALLY. After i think a week and 1/2, i finished a project that should have taken 2 days tops. I finished compunding, could not get pictures. It was dark when i got a chance and they wouldnt come out right. Will get some in the a.m. I already purchased the wax to top it off, plan tomorrow along with organizing my toolbox...

4x91

Pics:

4x91

The tape was to hold the windo while i replaced the motor.
First was removing the pins



Then i broke off the heads and freed the wole mechanism



Then i changed out the motor



Then i re installed it and it works again

Snaggletooth

Something I found working on my door. The new window motor is smaller and if you need to take it out again it's possible to remove just the motor and leave the track in the door.

4x91

One i bought was bigger

Snaggletooth

Ah well I know the smaller one will come out through the hole next to it, can't say anything for the bigger one I removed the whole track when it was in there.

4x91

Been using TurtleWax chrome polish on all the trim. It is looking nice, forgot to grab pics. Away from home but will get them sometime. Did take these before and during:





---@---@---@---@---@---@---@---@---@---@---@---@---@---@---@---

(EDIT)
sorry i did get this:

4x91

Also started waxing but the microfiber bonnets that i bought didnt quite work, and only got the bed and pass. door before it did not work at all.




So i try to hand do it, instead of with the buffer, and it doesnt do anything. Is there a method i am missing?