Ford F150 Forum - Community of Ford Truck Fans - View Profile: tmc161

tmc161 tmc161 is offline

1993 F150 4x4 5-speed 3"

Visitor Messages

Showing Visitor Messages 1 to 10 of 12
  1. 1987 F-150 XLT 4x4
    09-21-2010 05:17 PM - permalink
    1987 F-150 XLT 4x4
    Rancho 4" suspension lift

    Spring height on-truck
    15.75" tall on driver side
    15.25" tall on passenger side

    Truck sits level , unsure why the 1/2" difference?

    These measurements are from the bottom edge of the coil spring to the top edge. I measured each side several times to be sure.

    They have been installed for 10.5 years and 62K miles.


    tmc161 Would you be able to do me a huge favor and measure how tall your coil springs are under pressure? Mine are sagging and i want to know roughly how much.I got the same susp. lift as you but i bought it used. Thanks
  2. conman365
    06-09-2010 08:16 PM - permalink
    haha. That's Dublin Dr. Pepper though. The best ****
  3. happyhourhero56
    04-23-2010 01:43 PM - permalink
    yeah the gears are stock 3.55's for now they're 38x15.50's surprisingly the truck still runs realy strong through the low gears on the interstate i pretty much gotta run it in 4th but this is WV and it's all mountains. if you keep your 3inch body and put the 6inch suspension you can stuff 38's with a little trimming.
  4. happyhourhero56
    04-18-2010 09:10 PM - permalink
    my 95 has the stock TTB but i'm workin on gettin stuff for a SAS swap and when i do that i'm gonna be doin gears and lockers and all that at the same time.
  5. happyhourhero56
    04-18-2010 09:07 PM - permalink
    no i don't really have any pictures of my truck in the mud 90% of the time i only mud it after dark and alcohol is involved. can't really take pictures
  6. 965.84x4
    03-31-2010 01:40 AM - permalink
    ouch 650 for books? damn. i gotta do it a little bit at a time, ive either put away 75 a week or spent it for about a year now, itll take a little while but shell get finished
  7. 965.84x4
    03-30-2010 10:51 PM - permalink
    I like that bumper, you're right you'll be fine with the body lift
  8. 965.84x4
    03-30-2010 10:41 PM - permalink
    you might have to do some trimming with the 4 inch and 35s i had to take a little of the bumper with the six inch and 35s
  9. 965.84x4
    03-30-2010 10:39 PM - permalink
    I hear mostly bad, Im planning on doing an sas to a striaght dana 44 and regearing to 410, But i was also thinkin about dana 60s front and rear, not sure itll all depend on the money
  10. 965.84x4
    03-30-2010 12:52 PM - permalink
    the axles are stock dana 44 ttb, and ford 8.8 rear, its only been lifted a few months, cant say if itll stay or not, biggest problem with alignment so far is finding a shop that knows what they're doin. les schwab and a local shop both told me they coudlnt adjust my camber so i bought the adjustable camber shims and im going to do it myself

About Me

  • About tmc161
    How did you find
  • My Truck
    F150 Reg. Cab XLT
    Billet grille, Hella off road lights, Small driving lights, alpine type-s subs and speakers, kenwood amp, 3" body lift,4" rancho suspension lift, 33" Goodyear Wranglers, Herculiner, Flowmaster muffler, Toolbox, diamond plate bed rail covers, Painted a few interior parts, Air Horns, Warn Manual Locking Hubs
  • Signature
    1993 F150 XLT 4x4 5 Speed 7" Lift 33" Goodyear Wranglers
    Though I wheel through the valley of the shadow of death,
    I will fear no evil: For thou lockers are with me;
    Thy lift and thy tires, they comfort me.
    Thou preparest a spotter before me in the presence of mine obstacles


Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: 06-17-2011 02:34 PM
  • Join Date: 09-25-2009


Showing Friends 1 to 9 of 9

All times are GMT -4. The time now is 01:50 AM.

Copyright 2006 - 2017 We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.