it cost me a little bit more than expected. but over thanksgiving i took 16" of lift off and put it on 37's, to be more user friendly while i go turbo in it. and savin up for coilovers already have the 2.5 tons for when i go back up with it

3 inch leveling and 3 inch body on 35x12.5s

Its a 6in fabtech lift with 35in tires on 18in rims.
It was ether $2300 or $2600 installed

thanks for the comment,and i do have a 3inch leveling kit and 1.5inch rear blocks made by READYLIFT.it can clear up to 35inch tires without scrubbing. i used to have a 2.5inch leveling kit by skyjacker but readylift is pretty cheap and better made, but you have a nice truck, whats your plans for it?

leveled with about 2" of lift. cranked aftermarket torsion keys for about 3" of lift in the front, then replaced the factory 2" blocks with 3.5" blocks to get 1.5" lift in the back. so its lifted about two inches, and leveled where the front sits just a tiny bit higher than the back does.

Nope no lift. 2" leveling kit. The rims are 20" XD Rockstars. Tires are 33" Nitto Terra Grappler.

not much really cause i took the time to shop around and find best prices and did all the work myself

I'm running a 2 1/2" Daystar kit that's been in over 4 1/2 years with no problem's. Tires are 295x70x17 Toyo MT's on 17x9 with 5" BS American Racing Crater wheel's. Tires are close to 34 inches tall and seem to be a perfect fit on a leveled 4x4.