Hey Livitup, maybe you can help me out I just replaced my IPMB module on my 2017 raptor due to the colored screen as far as programming it can I do this myself with forscan or do I bring it to the dealer?

..

During the 3-day access you can print everything that you want from the wiring diagrams and service manual or simply print to pdf if you have that under installed printers. The online site will also give you connector info such as pigtail part #'s and terminal part #'s if you end up having to run your own wire. If you get a VIN from a Bronco with ACC then it's easy to pull the factory settings for the CCM/SCCM but if the values also contain your VIN then it will need to be changed to match your VIN. You're definitely going to need the CCM alignment/calibration procedure so I would email FORScan support at forscan.org/contactus and ask if the procedure is included for a '21 Bronco.

Thank you very much for the reply.
1- Do you think the 3 day access is better than a paper book "2021 FORD BRONCO WIRING DIAGRAMS" off of ebay? I see used ones go for about 60-70. Can I copy from the online access to say like PDF or word maybe?
2- I kinda have an idea about the part list. CCM, CCM bracket, steering button, a wire that weirdly enough connects to both lower radiator shutter motor and CCM from the main harness. and an expensive lower radiator shutter assembly ($1,100) which is different in ACC and non-ACC models (I will buy this last if everything else works(not too hopeful lol)).
3- For the programming, lets say I get access to a bronco with ACC, is it possible to just copy settings from it and make changes identical in my car to make stuff work?
4- And lastly, from what you say if Forscan cant calibrate, this whole thing is pointless because dealer would never do it. correct?
I truly appreciate your time, input and help.

Thank you

Hi, Can you help me for a fee?

I just took delivery of a 22 Bronco that does not have the ACC. After searching the web for couple of days looks like the issue is more complicated than what I would be comfortable to tackle so I decided to ask you to see if you are willing to help.

The car has all the necessary sensors (I think) I have the "high package 333A" which comes with front radar and co-pilot360 etc. Only thing I think I am missing is the steering wheel button that I can order for about $80. Unless the harness is different?

Anyhow I live in Los Angeles and I see your profile says socal so you might be close and if you take the job we can meet up hopefully sort it out.

I understand that you may not want to take on the task. In that case would you know anyone that could do this L(like a shop or something)?

Thank you

Oh really?!? That's awesome man, congrats!

I was thinking same. btw, we developed a cool little tool to flash any firmware to any apim so we can go backwards or load the new Unreal based on the 2021 apims

I honestly don't remember but I'm guessing one of the APIM updates did away with it if that's the case and I don't know if there's a way to bring it back since I've never tested.

sorry lower right corner

we had it on there for a few minutes (lower left corner) similar to sync3 then it just vanished