Is this something that you expect Forscan would update in the future? Any clue what would happen if I changed the 0 to 36? Do you happen to have a tutorial or video out there that shows how to restore a module to as built? I am contemplating trying to change the 0 to 36 to see what happens. . . as long as I can get back to as built. I did backup all of the modules as you show in your tutorial.

Hello, I have been reading through your forum posts. 2022 F-150 3.5L Ecoboost Lariat. I am trying to change the fuel tank capacity (DTE) from the little tank to the 36 gallon tank. In FORscan, the current tank size in both Gallons and Liters is 0. What should I do? I am trying to use the plain english area of FORscan since I believe this is the only thing I will adjust. If you could help me any, I would sure appreciate it.

Thanks for all your info on using ForScan. I have a 2017 F-150 Lariat 3.5 ecoboost. I changed the original DRL (low beams) to the yellow led parking lights with no problem. When I tried to write the yellow turn signals as DRL, it gave me an error and reverted back to just the parking lights. I have tried it with your tutorial spreadsheet, and also the easy mode with the same results. What am I doing wrong, or not doing? Thanks for your help.

Hey buddy I purchased my cluster from you a few years ago, but was wondering if you could help me out with a few wiring harnesses.

I have a 2019 STX that i have upgraded to folding mirrors and technology package harnesses and door modules a few years back. I recently acquired some Tow mirrors and installed them. I would really like to get the power telescopic part of these working, but i understand that some wires need to be ran from door connector to engine bay. Can you help me out with the harnesses and correct route i should run these to?

Let me kow.

Hey There, ive been a Forscan user for a while now so thank you very much for all your hard work. I currently have a 2022 and have a bunch of changes implemented with Forscan and love it. I am wondering if you have found a way to work with the stupid electronic column shifter at all. i hate the way it shifts to park when you don't depress the brake fully or open the door etc. I also am not super excited about the automatic park brake application when the truck "rolls" on a slight hill.

Do you have any experience with a 2019 Raptor 8inch cluster swapped into a regular 2020 F150 5.0?
I have a few questions forscan related with the IPC programming etc.
Any help would be great.
Thanks,
Justin

It was on me, thank you. I back tracked and was able to fix the issue. Thanks again

Hey brother,

I am new to this forum I have a Gen 3 Raptor 2022 and my brother-in-law made a few changes to it with Forscan and I have a little issue I would like to bounce off you.

We did the start stop disable with the code 730-03-01 xxxx xxxx 00-- now my truck will still cut off some times at a red light but the switch is disabled so it does nothing but as soon as I put it in park it starts up and show the start stop disable icon. kind of weird he used the 327 with the toggle switch so I am not sure if that had anything to do with it. But I did see a member use this code for the start stop which is different than the spreadsheet. 730-03-01 xxxx xxxx x0-- got any thoughts on what may be going on?

Thanks
Raymond
805-990-6569 feel free to text me

​​​​​​​I'm mostly on the Raptor forum

Where can I find the code or parameter to disable cylinder deactivation on my 2022 F-150 5.0?

Hi Livitup, I recently enabled the unreal theme on my 2022 F150 and it looks nice. For some reason, the outside temperature display in the top right corner of the center screen is only showing 2 dashes and no temp. I reset apim as well and it did not fix it. I also reverted it back to original and still gone. Any thoughts on this? Thank you for all that you are doing for us out there! Really appreciate it.