Hello I just replaced passenger side headlight and ballast on my 22 lariat I have no high beam or DRL IM trying to figure out how to reprogram with forscan. Any help is appreciated.. sorry to bother you with this but I have searched online for the last three days I’m hoping you can help

Hi - Thank you for accepting my friend request. I wanted to check with you if you have used the latest BlueCruise feature or if you know people who are using it.

I would unplug the CCM at the front bumper if you haven't already and then make the following changes below but back up each module first so you can revert these changes if needed. Ignore whatever you have where the x's are and just change the non-x value where indicated and ignore any warning by forscan about incorrect checksum and continue with the write.

IPC 720-01-01 xCxx xxxx xxxx - disables ACC & ACC Menu
IPC 720-01-02 xxxx 1xxx - disables Forward Collision Warning & Front Distance Alert
IPC 720-04-01 Dxxx xxxx xx-- - disables FCW ON Menu
IPMA 706-01-01 0x4x xxxx xx-- - disables distance alert & IACC
BCM 726-16-01 xxxx xx88 xx-- changes from ACC stop & go to normal cruise control only

1FTFW1RG5NFC30023

Thanks so much!

Hello Sir - I'm really sorry to bother you with this but I cannot find any references online and you seem like the internet Oracle for FORScan! I recently replaced my D-S BLIS module (2016 Lariat) and hit a snag when matching my VIN in FORScan. The original 7C4 - SODL module had 10 blocks but after installing the new BLIS, I'm getting 2 additional blocks (7C4-11-01/02 & 7C4-12-01) and a couple of the original blocks have different inputs (7C4-02 & 7C4-07). I've been able to reconfigure all the differences and 'Write" successfully.....except Block #2. Specifically, the 7C4-02-02 line went from a [xxxx] - [xxxx] format to a [xxxx] - [xxxx] - [xxxx] format.
Do you know how/if I can "rewrite" the original inputs into the new format with 4 extra digits? All other blocks are working except this one now :-(
For reference,
- Original 7C4-02-02 was [0000] - [14E3]
- After new BLIS, it changed to: [1401] - [0001] - [00E5]

I have a question regarding shutting off Adaptive cruise control and Forward Collison Warning. I have a 2022 Ford Raptor with an aftermarket bumper, and am having cruise control issues. I know someone with a 2020, and you helped him disable this feature. Will the following values work on a 2022, and if not, do you know how to do this? Also, any way I can donate to your cause? Thanks for your help!
BCM 726-13-01 xxx8 2xxx xxxx
IPC 720-01-01 xCxx xxxx xxxx
IPC 720-01-02 xxxx 0xxxx
IPC 720-04-01 Cxxx xxxx xxxx
ABS 760-03-01 4xxx xx

Awesome! Thanks for the information, and I'll go ahead and purchase the Extended License.

Hello,

I have a question regarding what is possible with FORScan prior to purchasing the product. I have a 2023 Ford Bronco, Outerbanks with the Lux and Sasquatch packages. Since I purchased my Bronco in November 2022, I am now on my 4th hood latch/sensor for PATS. Basically, the alarm goes off randomly for no reason, and Ford service just keeps saying it is a defective sensor. One or two times might be understandable, but not four. This indicates a design defect, but Ford is not willing to acknowledge this or correct it.

I have no need for a car alarm, so I wanted to know if I can use FORScan to completely turn off the PATS/alarm. And if this is possible, are there any other consequences for doing so. Thanks in advance.

Greg

Hello, I've been reading many posts on how to add cruise control to my 22 F150 XL. Can you confirm that it is possible to add cruise control to this pickup? Thank you, Dan