well i went to get an alignment well they screwed some stuff up the idler arm the two bolts that bolts to the frame one was half way out and the other was loose and everytime i hit a bump the whole truck would shake till i stop so i retighten those bolts then masons tire and auto told me all the ball joints and idler arm needed to be replaced. it was a pain in the butt to get those two bolts loose cause i had torque them down so much so they would come loose but over all the idler arm just has two bolts that goes to the fram and a king nut and cotter pin those goes on the steering bar so it was pretty easy once i got them bolts out it cost me 66 bucks from napa auto parts

Hey buddy just wanted to say thanks for the website and giving me a hand with the balljoint stuff i replaced all the balljoints outer tie rod on drivers side and idler arm in about 10 hours so just wanted to say thanks

What's up? I'm sick of shoveling snow already. Answer me this, on RT 2 from the base all the way to to the interstate is clear all the time. 32nd street is always sh!tty. WTF?

isnt the upper balljoints and uca one assemble

u mentioned about balljoints and i was wondering what kind of tool it was and where u rented it from and if you could sort of give me the steps you took to change yours

How you liking this blizzard? This is the coldest weather i've ever been in!!! I work on the flight line, so tomorrow is really going to suck!! Stay warm!!

701-402-2708

Cool, thanks. I'll take his number if you have it handy.

yea, you can. The thing is I was going to work for him part time installing auto starts, but my schedule didnt work well for him as I had a full time job that was hard for him to work around. This was all within about a month ago,thats why I say he may or may not remember me. If he asks who I am, you could say I was going to work for him and he would remember. His name is Joe. If you want his number I can give it to ya.

Cool, thanks man. Should I tell them Cole sent me?