51 F3 Fuel Pump Rebuild; check valve replacement
09-29-2012, 07:10 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Galesville, MD
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
51 F3 Fuel Pump Rebuild; check valve replacement
Everyone: I'm in the process of rebuilding the fuel pump on my '51 F3. I've got all the seals and parts, but I can't get the two check valves out that are in the top lid of the pump. Any suggestions? Thanks. Wayne Arny
10-01-2012, 01:15 PM
#2
Senior Member
Wow the last time I dealt with a rebuildable fuel pump, Elvis was still alive.
On my 55 223 I used a pipe cleaner to dislodge a stuck ball from the fuel pump. On other things a shot of compressed air or copper wire can be used. The copper wire is softer than most metals so it shouldn't gouge or damage machined surfaces.
Regards
rikard
On my 55 223 I used a pipe cleaner to dislodge a stuck ball from the fuel pump. On other things a shot of compressed air or copper wire can be used. The copper wire is softer than most metals so it shouldn't gouge or damage machined surfaces.
Regards
rikard
10-02-2012, 09:59 AM
#3
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Galesville, MD
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Rikard, Thanks! I was able to find the manufacturer of the kit up in Massachusetts. Indeed, they manufacture kits mostly for fuel pumps that were in use long before anyone knew of Elvis! The mechanic there advised me to use brute force to pry the old ones out, as they are a press fit. I'll try that and see how it goes, before I resort to buying a new one, of which there are many out there! Wayne
11-10-2012, 08:37 AM
#6
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Galesville, MD
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Actually, it wasn't that difficult, just "unknown." The good news about the cars/trucks of the 50s & 60s is that there are usually good manuals available in print or in digital format with a lots of data available on line. And there seem to be lots of parts out there and people reproducing them. (Try finding things/info for a 1910 Hupmobile! Or better yet, the 1922 Velie I had for a while!) In this case, I found the kit on line and ordered it. When it came to installing the two valves, I couldn't get the old one out, so I called the company who sold it to me. In many cases the sales site will have experienced mechanics working there, and they'll have an answer for you. In this case, they didn't know, so they gave me the name and number of the kit manufacturer. They in turn told me how to punch out the old valves and install the new ones! Good luck!
