Just finished my Cummins 5.9 into a 1994 f150!

 

What did you use for suspension to hold that lump of iron up off the street? I put a 3.9 4bt in a 79 f250 got great milage but the vibration shook the fillings out of my teeth not to mention every nut, bolt, rivet and screw out of the truck. I was on a 1st name basis with the locktite salesman.

 

This is a very uninformative how to...

 

That's part of the fun of two missing cylinders. I ve posted the local junk mans 5.9 f350 before, he used the springs from a 351 f350, and lost about an inch or so of ride height.
He had terrible vibration issues with his 4bt swapped Dakota, even using the same mounts as he used in the ford, wishes now he had used a 6.

 

Lol..yep those 4bt's fire 20 degrees less often do to 2 missing cylinders..my 6bt only shakes on shut down..liquid motor mounts and f350 springs ..400 miles..so far soo good!

 

Useless without pictures

 

 

That's what I started with...

 

Gutted...

 

6bt in frame..finally!