Switching relay with dome lights and switch problem
Hi, I've wired up a relay that takes power from the dome light to switch it as well as a rocker switch I installed.
Here is the schematic I drew up: https://www.f150forum.com/members/xa...547-lights.png Of course, the issue I'm having is that when I use the rocker switch ("CabSW") to flip the relay my dome and cargo lights turn on because I have the "CargoLights" lead connected to the positive switched wire in the dome light assembly. How can I fix this so that only my relay turns on and not the other lights? I'm assuming I may be able to just put a diode on the one wire, would that work? Thanks! |
Originally Posted by Xamith
(Post 3484845)
Hi, I've wired up a relay that takes power from the dome light to switch it as well as a rocker switch I installed.
Here is the schematic I drew up: https://www.f150forum.com/members/xa...547-lights.png Of course, the issue I'm having is that when I use the rocker switch ("CabSW") to flip the relay my dome and cargo lights turn on because I have the "CargoLights" lead connected to the positive switched wire in the dome light assembly. How can I fix this so that only my relay turns on and not the other lights? I'm assuming I may be able to just put a diode on the one wire, would that work? Thanks! Yessir - you nailed it - a diode to block the backfeeding will do the trick. Good luck :drink: MGD |
Thank you very much MGD!
|
It's going to turn the dome light on, that's how you have it wired.
|
All times are GMT -4. The time now is 01:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands