Cruise Contol Doesn't Work - Troubleshooting Woes
04-12-2015, 05:59 PM
#1
Senior Member
Thread Starter
Cruise Contol Doesn't Work - Troubleshooting Woes
well I thought the cruise control would be a little easier to diagnose and fix than what I had with the airbag but again I have seem to hit a wall
I have the Ford manuals and have followed the steps, all checks ok until I think step 12, measuring resistance between terminals 5 and 6 and expecting a reading above 3k ohms, I get zero resistance which states that one of the command switches is stuck, well I got a used set and swapped them and still no reading. I guess I could have got a set with the same issue as mine but now think maybe I am just not doing something exactly as I should. My truck did get the recall done with the harness at the brake switch and it all checks good, I have verified all the brake fuses and light are good, I have a new clockspring and the airbag circuit is good. Does anybody know of some known issue I haven't mentioned? anybody else have a similar issue?
The cruise is the last non-working piece on the truck, a/c fixed last weekend just in time for a few 90 degree days.
I have the Ford manuals and have followed the steps, all checks ok until I think step 12, measuring resistance between terminals 5 and 6 and expecting a reading above 3k ohms, I get zero resistance which states that one of the command switches is stuck, well I got a used set and swapped them and still no reading. I guess I could have got a set with the same issue as mine but now think maybe I am just not doing something exactly as I should. My truck did get the recall done with the harness at the brake switch and it all checks good, I have verified all the brake fuses and light are good, I have a new clockspring and the airbag circuit is good. Does anybody know of some known issue I haven't mentioned? anybody else have a similar issue?
The cruise is the last non-working piece on the truck, a/c fixed last weekend just in time for a few 90 degree days.
04-13-2015, 08:36 AM
#2
Mark
iTrader: (1)
we working on the Ranchero or the Tremor... I'll bet it's the 95 F- 150...
04-17-2015, 08:07 PM
#5
Speedo working nice ? shifting good ?
Other than what you've been looking at the VSS and PSOM are the only things I can think of. Either of those would cause issues with the top 2 things.
Anything you need me to look at on mine (95 5.0) let me know.
Other than what you've been looking at the VSS and PSOM are the only things I can think of. Either of those would cause issues with the top 2 things.
Anything you need me to look at on mine (95 5.0) let me know.
04-19-2015, 11:03 PM
#6
Senior Member
Thread Starter
^ thanks, took a break this weekend, will get back to going through the troubleshooting steps another time, sometimes its best to just take a break
Trending Topics
10-21-2016, 10:02 AM
#8
Senior Member
Thread Starter
I never solved my problem, yet been working on other cars, will probably get back to it in another month or so, got a few other things to do to it once I get back at it
10-21-2016, 10:08 AM
#9
Mark
iTrader: (1)