Bleeding clutch system
 

I have a 94 f150 300 4.9 6 cyl. how can i bleed the clutch after replacing the clutch master with a internal slave. I'm not seeing the bleeder valve? :help:

Bleeder Valve Found
 

The bleeder valve won't be seen by eye. It is located just above where the inlet line goes into the bell housing. Like many mechanical applications it will be found by feel. It shoud have a little rubber cover on it. I will try to post a picture later

update
 

remove fluid line to transimion with proper tool press fitting valve like a valve steam till fluid runs out re-install line and pump up clutch it will self bleed.
dont forget to fill master first and check the fluid level as you cmplete the above.